Engineered for explosive penetration shots, maximum arch articulation, and tournament-grade mat bite. Featuring decoupled dual-traction rubber pods, reinforced suede lateral overlays, and ISO 17708 cold-cement bonding. Direct Jinjiang factory manufacturing starting at 300 pairs per colorway.
Why elite international wrestlers choose SDTDID's dual-pod architecture over rigid traditional outsoles.
Circular radial traction grooves engineered at 45° angles provide continuous grip through full rotational pivots, duck-unders, and re-attacks without edge catch. Molded from Shore A 58 non-marking gum rubber.
The midfoot rubber is eliminated and replaced with an abrasion-resistant Strobel lasting sockliner. This removes 30g of dead weight and allows natural arch plantar flexing during high-velocity launches.
The rear rubber pod wraps 22mm up the medial and lateral heel counter, maintaining mat contact during bridge defense and sprawls while locking the calcaneus firmly in place.
Every production batch undergoes destructive testing in our calibrated physical laboratory prior to Chairman sign-off.
| Test Item | Standard Code | International Requirement | SDTDID Lab Result | Status |
|---|---|---|---|---|
| Mat Dynamic Friction (DCoF) | ASTM F2913 / SATRA TM144 | ≥ 0.50 (Dry vinyl) | 0.68 – 0.72 | PASSED |
| Sole Bonding Peel Adhesion | ISO 17708 / SATRA TM411 | ≥ 3.5 N/mm | 4.2 – 4.8 N/mm | PASSED |
| Bally Flexing Endurance (-5°C) | SATRA TM133 | 50,000 Cycles without crack | 100,000 Cycles (0mm crack) | PASSED |
| DIN Rubber Abrasion Resistance | ISO 4649 / DIN 53516 | ≤ 150 mm³ loss | 118 mm³ loss | PASSED |
| Lining Martindale Abrasion | ISO 12947-2 | ≥ 25,600 rubs dry | 51,200 rubs (No hole) | PASSED |
Minimize overseas ocean and air freight landed cost by selecting the optimal packaging configuration. All master cartons pass ISTA-1A drop tests.
FSC-certified rigid cardboard with custom CMYK brand printing + tissue wrap. 12 pairs per master carton (0.095 CBM/carton). ~3,800 pairs per 40HQ.
Ventilated zipper polybag with suffocation warning + FNSKU barcode. 24 pairs per master carton (0.082 CBM/carton). ~8,500 pairs per 40HQ (55% freight savings).
Evaluate SDTDID's physical material quality prior to sample cutting. We dispatch physical swatch kits via DHL Express within 24 hours:
A split-sole design decouples the forefoot and rearfoot rubber pods, allowing the foot to articulate naturally through 360-degree rotational angles. This delivers superior toe drive during penetration shots and rapid level changes while shedding 25-35 grams compared to full-length rubber soles.
Our proprietary Shore A 58±2 virgin gum rubber split-sole compound achieves a certified DCoF of 0.68 to 0.72 under ASTM F2913 and SATRA TM144 calibration, ensuring instantaneous bite without slipping during high-torque scrambles.
Our standard production MOQ is 300 pairs per colorway across a standard US Men 7–15 (EU 38–47) size run. Utilizing our in-house open-mold radial lasts eliminates tooling mold expenses for brand launches.
Yes. We offer 1.2mm microfiber synthetic suede, engineered jacquard sandwich mesh, heat-welded TPU mudguards, custom Pantone dyeing within 48 hours, and private woven tongue / heel logo execution.
Direct response from Jinjiang engineering desk within 8 hours. PPS samples dispatched in 7–10 days.
